Grandfather clocks

Grandfather Clock Sale Attention Service

06.17.14

Finding a grandfather clocks sale is easy.  Look just about anywhere online, and you will have the words discount, for sale, for less, sale ending soon, free gift, lowest price, most savings, and on and on and on.

So what is the 1-800-4CLOCKS difference?  At well over 90% of the places that list grandfather clocks for sale, one will find they cannot find anyone to answer any specific important questions, like the difference between Howard Miller Grandfather Clocks, Kieninger grandfather clocks, and Ridgeway and Hermle Grandfather Clocks.  What about differences not only between grandfather clock brands, but the different models made by those same makers.  And staring at a consumer everywhere will be much less expensive clocks that may look nearly identical to others.  Are they both heirloom quality grandfather clocks?  Will the chimes quality be the same from brand to brand?  Will the clocks last several generations, or simply be lucky to make the trip home and hopefully get it running.  What about questions like the difference between grandmother clocks and grandfather clocks? How much does the movement maker matter?  Should you consider buying a quartz or battery operated grandfather clock.  What is the difference between a single chime Westminster Chime grandfather clock, a triple chime grandfather clock, and what on earth is a tubular chime grandfather clock, and should I ever consider one?  What about new vs used vs antique grandfather clocks and floor clocks.  And these questions would likely be just the beginning for a thoughtful grandfather clock shopper who is trying to get a sense of the market and pros and cons of grandfather clock choices.

So you have found someone who is willing to talk with you, and knows something about grandfather clocks.  But how much?  Unless you happen on someone who is both expert and available, one could be spinning his or her wheels for a very long time. This is where the 1-800-4CLOCKS difference comes in to play.  We know all the makers, from the current high-end grandfather clock brands built to last to the “junk brands” built to get you out the door with their merchandise (and frequently not even any instruction booklet).  We know the differences between brands and within brands.  Our salespeople do not work on commission, so they are always looking to give you the best advice to get and hopefully keep you as a long-term customer who is informed about the market.  There is a lot out there that an informed person would want to avoid, and in some cases minimally go in with eyes wide open.  This is particularly true with vintage grandfather clocks, where the risk of buying a cash eating machine is all too real.

Our stores were founded by people who have a passion for clocks and watches, and we look for that in everyone who comes to work with us.  Our roots are actually in antique clocks, so we know grandfather clock history, the movement maker history, not only who the current players are but also who the historical players were, and the implications that has for chiming mechanical floor clocks made today.  This is also true for mantel clocks and wall clocks.

We know the Howard Miller and Herman Miller of today, and we also know the Howard Miller Clocks from 90 years ago.  We know Hermle Grandfather Clocks from almost 100 years ago.  We know Ridgeway grandfather clocks and grandmother clocks, not to mention Kieninger grandfather clocks, from 50 to 100 years ago.  We also know about Sligh grandfather clocks, the famous Seth Thomas regulators and grandfather clocks and wall clocks and mantel clocks, and Bulova and Americana grandfather clocks.  Plus throw in Tiffany Grandfather Clocks made over many years, all the features added over time, including illuminated dials and automatic nighttime shutoff, the changes in features like tubular chimes, and we have a virtual treasure trove of information to share the relevant tidbits to match the needs of our customers.  Additionally, we are always willing to work with a customer as best we can to match their needs and desires with realistic budgets within which they are working.

We aim to surprise and delight our customers every single day with exception service and attention to detail.  And with all that, not only will we work hard to give you best value for grandfather clocks money spent, but also still the best grandfather clock sale price available anywhere.

Grandfather Clock Service Award

 

 

 

 

 

Howard Miller Clocks Barometer Instructions

02.24.14

DIRECTIONS FOR HOWARD MILLER WEATHER INSTRUMENTS Including Barometer such as Howard Miller Presque Isle Barometer, the Howard Miller Catalina Barometer, and  the Howard Miller Olympia Barometer.

Barometer Instructions:

Disregard the words Rain, Change and Fair as these are only traditional zones on a barometer dial. Your barometer indicating hand will never move all the way to Rain to predict inclement weather. The normal operating range of movement for your barometer indicating hand is from 29.5 to 30.5 inches of mercury. Your most extreme readings would occur before a hurricane or tornado when barometers have dropped as low as 28.5 inches of mercury: or, at the other extreme, if very fair, dry weather is to come, your barometer may rise to 30.9 inches of mercury.

The following procedure, if done every 12 hours, or morning and evening, should give you the best results:

1. Tap the instrument lightly to release any latent action.

2. Record the inches of mercury as indicated by the barometer hand. This is your momentary reading. Some barometer models have a set hand which can be positioned directly over the barometer hand.  At a later period you will be able to notice in what direction the barometer hand has moved since the last setting.  If it moves to the right (clockwise), you have a rising barometer which usually means a change for the better or continued good weather.  If the reading is to the left (counterclockwise), you have a falling barometer which usually means a change for the worse. A steady barometer means no change. For accurate weather predictions, it is highly important that your barometer be adjusted to sea level.  The correct sea level reading can be obtained from your Weather Bureau or television weather forecasts.  Readings obtained from your barometer indicate weather conditions that may prevail within the next 24 to 48 hours, providing wind direction and velocity remain the same as when readings were obtained.

Adjustment of the Barometer:

In the event that your barometer does not read exactly like the reading obtained from your local weather forecast, the instrument should be adjusted. Adjustment can be made from the back of the instrument. Adjust the barometer hand by turning the adjustment screw located in the hole in the back of the instrument.

Clock (if applicable):

To set time on movement remove back cover of movement housing for access to battery compartment. Install (1) AA alkaline battery (not included). The battery must be installed with the positive (+) side located as indicated on the battery compartment. The hands should be set by turning the knob on the back of the movement in the direction of the arrow until the hands indicate actual time.

Caution: When clock stops remove battery immediately and replace with a new LEAKPROOF battery of the appropriate size.

Hygrometer:

The Hygrometer or Humidity Indicator is designed for indoor use.  While indoor and outdoor barometric pressures are identical, this is not true of the relative humidity. Therefore remember that this instrument indicates the humidity of the room atmosphere which has no relation to the outdoor humidity readings announced on the weather reports.

Adjustment of the Hygrometer

Due to transportation, this instrument may be off scale. To adjust put damp cloth on the back of the humidity indicator for 20 minutes.  The scale should then read approximately 95. If it reads a lower number or is off scale completely, merely turn screw on back until the pointer is on 95. The humidity indicator will then start to operate again. To maintain accuracy of the instrument, it is advisable to repeat this procedure every six months.

Thermometer

The mercury type thermometer is fitted with a glass tube exhausted of air.  During shipment, the liquid (mercury) in the tube may be separated. If so, this can be remedied by tapping the bottom of the thermometer (or the entire instrument) against the ball of your thumb. The liquid will thus form a solid column again. Horizontal and Vertical Hanging of Nautical Weather Instruments and Clocks Inserted fit ups of clocks and weather instruments may be rotated allowing the case to be hung in a horizontal or vertical position. To do this pull outward on rim bezel to remove fit up from the case. On some instruments by unscrewing the bezel, the dial can be rotated from the inside. This will enable you upon choice to hang the case from a horizontal or vertical position.

LIMITED WARRANTY

This product has been carefully manufactured using only the very finest of materials. The movement has been subjected to rigorous tests. Your Howard Miller product is warranted to be free from defects in materials and workmanship for a period of one year from date of purchase. If a difficulty develops with the product as a result of a defect in materials or workmanship, the Howard Miller Clock Company will repair or replace the product at the factory or its Authorized Service Station, at its option. Transportation charges to and from the repair location must be paid by the purchaser. In the event of a defect or malfunction, you should notify the Howard Miller Clock Company, Zeeland, Michigan 49464, Attention: Service Department, of the product defect or malfunction. Include your complete name, address, telephone number, the model number of the product, and the date and place of purchase. Performance of warranty obligations will be arranged by the Howard Miller Clock Company upon receipt of the above notification. The liability of the Howard Miller Clock Company is limited to the repair or replacement described above and this warranty is extended to the purchaser in lieu of all other remedies, including INCIDENTAL and CONSEQUENTIAL DAMAGES. (Some states do not allow the exclusion of incidental or consequential damages, so the above limitation on exclusion may not apply to you.)

This warranty is void if the product is serviced by anyone other than the Howard Miller Clock Company or one of its Authorized Service Stations unless prior written authorization is granted by the Howard Miller Clock Company Service Department. This warranty is limited to the original consumer purchaser of this product.

ALL IMPLIED WARRANTIES WITH RESPECT TO THIS PRODUCT (INCLUDING MERCHANTABILITY) ARE LIMITED TO ONE YEAR FROM DATE OF PURCHASE. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES AND THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Howard Miller Clocks

860 East Main Avenue Zeeland, Michigan 49464-1300

Corporate Office: (616) 772-9131 Fax: (616) 772-1670 Technical Assistance/Parts: (616) 772-7277

Home page www dot Howard Miller dot  com

Printed in U.S.A © Copyright 1998 Howard Miller

Howard Miller Olympia Barometer
List: $940.00
SALE: $658.00

Howard Miller Catalina Barometer
List: $633.00
SALE: $443.10

Howard Miller Presque Isle Barometer
List: $358.00
SALE: $250.60

 

Durfee Tubular Chime Grandfather Clocks

01.24.14

The Walter Durfee Tubular Chimes grandfather clocks were the pioneers in bringing Grandfather Clock with Tubular Chimes Clocks to the USA.  Below is an early advertisement which not only talks about these amazing Walter Durfee Tubular Chime Grandfather Clocks, referring to them as Tubular Chime Hall Clocks, but it also shows the Authorized Dealers and Agents for the patented system they have in place.  You can see the text for the Walter Durfee ad, which we estimate was from circa 1900, and the actual ad itself, also below.  Note the ad referred to these grandfather clocks as Hall Clocks.  Also, generally speaking, grandmother clocks cases would be too small to house tubular chime clock mechanisms.  Most mechanical clock tubular chimes with 5 tubes play the Westminster Chime only and with 9 tubes play triple chimes, usually including St Michaels Chime and the Whittington Chimes.

Interestingly, today tubular chime grandfather clocks are still offered, but relatively few people in the general public, and even many grandfather clock enthusiasts, know little or nothing about them.  Howard Miller Clocks offers as its most expensive grandfather clock the J.H. Miller II Tubular Chime Grandfather Clock model 611-031 or 611031, in a Limited Edition, and shown just below:

Howard Miller J. H. Miller II Grandfather Clock
List: $27,293.00
SALE: $19,105.10

The above clock is also offered without tubular chimes and still in the same amazing Limited Edition Case,  model 611-030 or 611030, and is known as the JH Miller Grandfather Clock.  Both of these clocks are more expensive than Howard Miller Presidential Edition Grandfather Clocks, which are considered by many to be the top of the line.

Howard Miller Clocks most expensive wall clock is very modern or contemporary, with an open case and tubular chimes, and named the Howard Miller Focal Point Wall Clock model 622-779 or 622779, and shown below:

Howard Miller Focal Point Wall Clock
List: $11,575.00
SALE: $8,102.50

Hermle Clocks offers some Grandfather Clocks that are also Tubular Chime Grandfather Clocks, and include these models:

Hermle Triple Tubular Chime Worcester Grandfather Clock
List: $8,097.00
SALE: $5,263.05

Hermle Triple Chime Essex Grandfather Clock
List: $18,379.00
SALE: $11,946.35

Hermle Foreman Cherry Tubular Grandfather Clock
List: $11,397.00
SALE: $7,408.05

Hermle Foreman Walnut Tubular Grandfather Clock
List: $11,397.00
SALE: $7,408.0

Hermle Anstead Walnut Tubular Grandfather Clock  Also available in Cherry and Oak wood models
List: $10,947.00
SALE: $7,115.55

Kieninger Grandfather Clocks also offers some high-end both contemporary and traditional tubular chime grandfather clocks.  An example of one contemporary Kieninger Clocks Tubular Chime Clock is shown, with model 0126-02-01, and pictured just below:

Kieninger Edwards Grandfather Clock   also comes is a brass-bronze contemporary clock case.
List: $24,130.00
SALE: $16,891.00

Some of these tubular chime grandfather clock models are the exact grandfather clocks that were offered by Sligh Grandfather Clocks and Bulova Grandfather Clocks.  Also, lead times can vary and new tubular chime grandfather clock models can be added and are sometimes discontinued.  It is always a good idea to call us at 1-800-4CLOCKS (1-800-425-6257, ext. 1) if you are thinking about purchasing one of any of these great tubular chime grandfather clocks.  At this moment, we do not have either and Walter Durfee antique tubular chime grandfather clocks or any Herschede Tubular Chime grandfather clocks. That can always change.

 

HALL CLOCKS.   This is the Walter Durfee Tubular Chime Grandfather Clocks Ad also showing authorized agents.  Picture of actual ad is farther down below with text just below:

Do you want something that will last? The most beautiful Wedding Present that can be given is something that will speak for the donor fifty to one hundred years.

Can you spend the amount and get more satisfaction for your money than by purchasing a beautiful Tubular Chiming Clock? The Tubular Chimes are like the chimes of a Cathedral from a distance. Changes of the weather do not affect them, as the tone is produced by the bell and does not depend on a sounding board.

These Tubular Chiming Clocks are fully protected by Letters Patent, and persons purchasing should see that every bell is stamped with our name.

They are sold only by our authorized Agents, and any infringement of our rights is subject to heavy royalty on either buyer or seller.

Clocks imported with Tubular Bells come under this infringement, as we control all U.S. Rights.

The List of Agents given below speaks for the superior quality of these clocks. Each Agent has Photographs of all our designs, which they will forward by mail on application.

AGENTS:

Theodore B. Starr, New-York,   Woods & Hosley, Springfield.

Spaulding & Co. Chicago.  Tilden, Thurber & Co. Providence.

Bailey, Banks & Biddle, Philadelphia.  Henry A. Turner & Go. Boston.

Jas. E. Caldwell & Co. “   Bradstreet, Thurber & Co. Minneapolis.

J. C. Grogan, Pittsburgh  Frank Herschede, Cincinnati.

Wright, Kay & Co. Detroit.     Jaccard Watch & Jewelry Co. Kansas City.

The Cowell & Hubbard Co. Cleveland.  Mermod & Jaccard Jewelry Co. St. Louis.

WALTER H. DURFEE & CO. Providence, Rhode Island

Durfee Tubular Grandfather Clock

Walter Durfee Tubular Chime Grandfather Clock

 



 

 

 

 

Hermle Clocks History

12.30.13

Hermle Clocks North America

Welcome to Hermle Clocks’ History.  Hermle Clock builds beautiful clocks of all kinds, including grandfather clocks, floor clocks, anniversary clocks, grandmother clocks, wall clocks, mantle clocks, cuckoo clocks and specialty clocks including Telleriums and Astrolabiums.  Mechanical chime playing clock movements, as well as quartz operated movements, are one key specialty.

In 1977, Hermle Black Forest Clocks located in the scenic foothills of the Blue Ridge Mountains manufactured and shipped its first
Hermle mechanical movement on US soil.  It was the beginning of how the modern era of the clock industry was going to proceed.  Hermle supplied many of the existing clock case goods manufacturers with its sought after German quality mechanisms. Many of Hermle Clocks customers received training of our expertise in the assembly of their case goods.  Naturally, in the early 1980′s, Hermle Clocks was asked to assemble our movements into our customers cases which then became a staple of our production line.

In 2002, we opened our doors to the clock retail industry with Hermle branded clocks, including Hermle grandfather clocks, being assembled in our factory in Amherst, Virginia, and a selection of German made Hermle clocks.  After 6 expansions to our factory, Hermle continued our growth as not only the world’s leader in clock mechanisms, but as an alternative grandfather clock, wall clock and mantel clock source to the retailers of North America.

Our innovations in design, form and function keep Hermle Clock ahead of the curve and its meticulous quality improvements have made
Hermle North America a preferred clock source to the industry. Hermle Black Forest Clocks was rebranded as Hermle North America in January 2011 to signify the next step into the future.  Hermle North America will become a one-stop shop for all genuine Hermle products, including carrying the largest Hermle and Urgos movement selection available to the trade in the world.  Our clock movements, clock accessories, clock parts and clocks are distributed throughout North America to a vast dealer network. To find Hermle Clocks in North America, please contact 1-800-4CLOCKS.com (1-800-425-6257, ext. 1).

The Hermle Clock History

In 1922 Hermle Clocks founder Mr. Franz Hermle founded the Franz Hermle Clock Company located in Gosheim in Baden Wuerttemberg, a small town in southern Germany’s Black Forest region.

Within ten years Hermle Clocks became known as one of the most efficient manufacturers of clock movements in the clock industry.  Even though the first half of the 20th Century brought with it many difficulties to overcome, including the complete dismantling of the factory after the World War II, Franz Hermle and his sons” dedication allowed them to prosper while other companies struggled.

Franz Hermle passed away in 1953 and left a modern and prosperous operation to his sons Gebhard, Alfred, Hans and Heinrich Hermle.  With tremendous willpower and energy, they continued to build the company into the worldwide leader in manufacturing mechanical movements and clocks.

In 1977, Hermle decided to establish another manufacturing facility, Hermle Black Forest Clock Company to serve the North American market out of Amherst, Virginia, USA.  Hermle’s Headquarters in southern Germany is now in its third generation, still family owned and operated.  Hermle employs over 200 people in 3 locations in both Germany and USA.  In October 2010, Hermle Gosheim was
rebranded as Hermle Uhrenmanufacktur GmbH and as of January 2011, Hermle Black Forest Clocks rebranded itself as Hermle North America.

Franz Hermle Clocks in Gosheim in Baden Wuerttemberg Germany

Wall Clocks and Mantel Clocks FAQs

12.10.13

To be helpful for grandfather clock and wall clock and mantel clock users and shoppers all across the globe. we are posting here some of the more Frequently Asked Questions for Mantle Clocks and Wall Clocks.  These lists were compiled by the technical support team at Howard Miller Clocks, and may apply to many other high-end wall clock and mantel clock brands as well.

For Keywound Mantel Clocks and Keywound Wall Clocks:

Following is a list of Frequently Asked Questions related to “Keywound” “Wall/Mantel Clocks”

 

What if my mechanical clock will not chime or strike?
  1. Check that the strike on/off lever in not in the “strike off” position or halfway between positions.
  2. Check that the movement is not in the “night off” position.
  3. Be sure that all the packing material is removed from the movement area. You should be able to carefully pull each hammer back away from the rod approximately one inch.
  4. Check the hammer adjustment to be sure that the hammers are properly aligned with the gong rods.
  5. For weight driven clocks, make certain that the weights are in their proper location. The proper position of the weights as you are facing your clock is labeled on the bottom of each weight.
  6. If your clock is a cable driven clock and was previously run, it is possible that the cables were not wound up with the weights left on the pulley. When this happens, the cables overlap on the drum. Check the cables on the drums to see if they are overlapped. If so, contact the dealer or retailer where you purchased the clock. Correcting this problem is not covered under warranty.
What if I need a part?
  1. If your purchase is new, is missing a part, and was not in the original carton, contact the location where you purchased the item. This will be the quickest and easiest way to obtain parts that they likely have, but failed to provide.
  2. If your clock is new, is missing a part, and was in the original carton, carefully check the packing material. At Howard Miller we take great care to include all parts with every item. If your are confident that the item is missing, contact Customer Service at (616)-772-7277 or go to the QUESTION section at the bottom of this site and detail the part that you need. Have your model number, serial number, and sales receipt available before you place the call.
  3. If your clock is not new or if a part is damaged and parts are required, contact Customer Service at (616)-772-7277 or go to the QUESTION section at the bottom of this site and detail the part that you need. Have your model number, serial number, and credit card available before you place the call.
What if I hear a squeaking sound while winding my movement?
The squeak is likely from the wood knob on the winding crank.  This is not uncommon and does not indicate anything is wrong with the movement or crank.  The movements themselves will not squeak when they are wound.

If you turn the crank by hand without using the knob, and you still hearing squeaking, then it is the pulley that is squeaking.  You can place one drop of oil (any type of common oil)  on both sides of the pulley wheel where the shaft goes through.

Why is it necessary to have my clock movement cleaned?

Movement oil collects dust and other contaminants from the air. These contaminants can be abrasive and the oil can harden. For this reason, it is necessary to have the movement cleaned and oiled. The frequency of cleaning and oiling depends upon several factors, some of which include the humidity and temperature controls and cleanliness of the environment. Based on these factors, oiling should be performed every 2 to 5 years and thorough cleaning every 5 to 10 years.

What are the symptoms that the clock movement should be oiled and/or cleaned?

Signs that a movement could require oiling or cleaning can include slowing or erratic operation of the time keeping, chiming melody, and/or hour strike. Continued use may cause excessive wear and require more extensive service to the movement.

What if I want to clean and oil my own clock movement?

Howard Miller does not recommend that you service the clock movement yourself. Contact an authorized Howard Miller Service Center. However, if you feel inclined, there are a variety of internet sites that offer detailed instructions and kits necessary to perform your own cleaning and oiling. Search “clock oil kit”, for example, on the internet.

What clock oil is recommended by Howard Miller?
Howard Miller recommends using the same high quality synthetic clock oil 859 used by the original German movement manufacturer, Kieninger. Most clock oil kits available on the web contain less expensive oils (Nano oil and others). Contrary to claims made by Nano oil and other suppliers and manufacturers of oil, our testing has proven the advantages of synthetic clock oil 859. For convenience, Howard Miller offers a synthetic 859 pen oiler for sale on the Howard Miller web site on the tab entitled, “Need a Part. Purchase Parts & Accessories Online.”
What if my clock chimes a few minutes before or after the hour?
If the clock chimes more than one minute before or after the proper time, the minute hand should be removed and adjusted.  For complete details, please refer to page 10 of the Floor Clock Instruction Manual or page 3 in the Wall and Mantel Clock Instruction Manual.  Copies of these manuals can be down loaded from our web site for your convenience.

Please click the link below to watch the video:

http://www.youtube.com/watch?v=s-99j6QSCoI&feature=plcp

How do I reset the time for daylight savings?
When setting the clock back one hour, rotate the minute hand counterclockwise one-hour. When setting the clock ahead one hour, rotate the minute hand clockwise one-hour. When moving the hands forward, it is important to allow the clock to chime every quarter hour (1/4, ½, ¾, 1) before advancing the hands to the next quarter hour position. . DO NOT MOVE THE HANDS WHILE THE CLOCK IS CHIMING OR STRIKING.

Please click the link below to watch the video:

http://www.youtube.com/watch?v=I_EGbI3SMsA&feature=plcp

Where is the closest Authorized Service Center in my area?
A list of Service Centers in your area is available on this web site.
What if my mechanical clock does not strike the correct hour?
If the clock is new, allow it to operate for several hours before making any adjustments. If the strike is off, grasp the HOUR HAND ONLY and rotate it forward or backward to line up with the correct hour on the dial indicated by the number of times the hour strikes. Rotating this hand independently will not harm the movement. Then adjust the hands to the correct time by rotating the minute hand counter-clockwise – as explained in the instructions. DO NOT MOVE THE HANDS WHILE THE CLOCK IS CHIMING OR STRIKING. After a few hours, the movement’s self-adjusting feature will synchronize the hands with the correct chime and strike.

Please click the link below to watch the video:

http://www.youtube.com/watch?v=QgaqpWTwIes&feature=plcp

What if my mechanical clock is in the “night off” position and it is silent during the day instead of the night?
Rotate the minute hand counterclockwise twelve hours. DO NOT MOVE THE HANDS WHILE THE CLOCK IS CHIMING OR STRIKING.
What if my clock chimes have the incorrect tone?
The chime tone may be affected by the hammer resting on the chime rod (coil) or striking the rod (coil) off center. Although the hammers were set at the factory, it is possible for the hammers to get out of adjustment.
Chime hammer arms are made of brass and can be bent safely. This is accomplished by bending the hammer arms slightly in the middle so that the hammers rest approximately 1/8 inch from the chime rod. DO NOT bend the chime rod. Strike volume cannot be adjusted.Please click the link below to watch the video:

http://www.youtube.com/watch?v=qmh1ao32JBo&feature=plcp

Can I increase or decrease the chime volume in my mechanical clock?
No. Volume is not adjustable.
What if a chime rod is broken?
Contact a local service center or Howard Miller for a replacement rod.
What if my mechanical clock operated fine for several years but now is slow or stopping?
It is likely that your clock movement needs maintenance. Contact an authorized  Service Center.  A list of Service Centers is located on this web site.  Cleaning and oiling are not covered under warranty.
What if the hands are bent?
The clock hands are easily bent. Carefully bend them back to the correct position.
How do I wind my clock?
Floor Clocks with Cables and Pulleys – Weights that are suspended by cables with pulleys should be raised by using the crank provided. DO NOT lift the weights by hand while cranking. Insert the crank into the holes located in the dial face. It does not matter in what order the clock weights wound. All weights need to be wound to the up position.

Floor Clocks with Chains – Pull straight down on the chains. DO NOT lift up on the weights as this could cause the weight to come unhooked from the chain. Pull down on the loose end of the chain until the weight is approximately 2 inches from the bottom of the wood movement mounting board. It does not matter in what order the clock weights wound. All weights need to be wound to the up position.

Wall and Mantel Clocks – Insert the winding key into the holes located in the dial face. Depending upon the model of your clock, there can be 1, 2, or 3 winding keyholes. Turn the key clockwise until the spring becomes tight and will not turn further. For clocks with hanging weights, raise the weights using the crank. DO NOT lift the weights by hand while cranking. Wind your clock once a week. It does not matter in what order the clock weights wound. All springs must be fully wound.

What is meant by “triple chime”?
Triple chime refers to clocks that play a choice of three different melodies. The most common triple chime melodies are Westminster, St. Michaels, and Whittington.
Why is it necessary to have my clock movement oiled?
 

In mechanical devices with moving components, oil acts as a lubricant to help prevent friction and wear. Over time, the oil must be replenished. The frequency of oiling depends upon several factors, some of which include humidity and temperature controls and cleanliness of the environment. Based on these factors, oiling should be performed every 2 to 5 years.

Who should I contact to have my clock cleaned and oiled?
Contact an authorized Service Center.  A service center locator is available at this internet site. Cleaning and oiling are not covered under warranty.
What if my clock is out of warranty and needs service?
Contact an Authorized Service Center. A list of Service Centers is available under CUSTOMER SUPPORT.

For Quartz or Battery Operated Wall Clocks and Mantle Clocks

Where is the closest Authorized Service Center in my area?
A list of Service Centers in your area is available on this web site.
What if my clock is out of warranty and needs service?
Contact an Authorized Service Center. A list of Service Centers is available under CUSTOMER SUPPORT.
What if my quartz dual chime movement will not operate properly?
Before going further, follow the two instructions below.

  1. First, ensure that you are using brand new alkaline batteries.
  2. Batteries made by various manufacturers may present some difficulty in working properly in the movement. A poor electrical connection can cause inferior performance. Ensure that the positive battery contacts are positioned over the nub on the end of the battery.

The problem area is typically the negative end of the battery. Ensure that the negative battery contacts are positioned completely on the metal contact area of the battery. As necessary, bend the battery contacts out to ensure that they are not making contact with the battery casing. If necessary to ensure a proper contact on the negative end of the battery, take a 1 inch by 1 inch piece of aluminum foil and fold it over tightly to the size of ¼ inch by ¼ inch and place it between the battery contact and the battery.

Other issues and remedies.

Pendulum will not swing: To provide proper pendulum operation, it is also necessary to ensure that the clock is level. Also check that the pendulum is properly located on the pendulum hanger and that the speaker wires are not interfering with the pendulum operation.

Chime volume is off or lower during the day and louder at other times: The nighttime volume reduction or shut-off is not properly set. Reset the nighttime shut-off.

Chime volume is always low: Attempt to increase volume using the volume control knob. If this does not solve the problem, replace the batteries.

Chime is off – will not chime: Ensure that the chime is not in the “OFF” position. If this does not solve the problem, replace the batteries.

The clock chimes several minutes before the hour when the hands are moved manually: This is normal. The clock will chime on the hour under normal operation.

What if I need a part?
  1. If your purchase is new, is missing a part, and was not in the original carton, contact the location where you purchased the item. This will be the quickest and easiest way to obtain parts that they likely have, but failed to provide.
  2. If your clock is new, is missing a part, and was in the original carton, carefully check the packing material. At Howard Miller we take great care to include all parts with every item. If your are confident that the item is missing, contact Customer Service at (616)-772-7277 or go to the QUESTION section at the bottom of this site and detail the part that you need. Have your model number, serial number, and sales receipt available before you place the call.
  3. If your clock is not new or if a part is damaged and parts are required, contact Customer Service at (616)-772-7277 or go to the QUESTION section at the bottom of this site and detail the part that you need. Have your model number, serial number, and credit card available before you place the call.

© Howard Miller Clocks

Complete Resource of Information on Grandfather Clocks

10.09.13

When shopping for grandfather clocks online, or looking for the best grandfather clock discount, knowledge of the market is critical to any savvy buyer.  Unless one happens to be an expert at their local Grandfather Clock Store or Furniture Retail Store which may have grandfather clocks on sale, the array of choices can become very hard to create a climate where a floor clock buyer feels he or she is in control.  This is compounded by the fact that more and more grandfather clock stores have gone out of business, and those that remain have significantly curtailed the number of grandfather clocks they may have on display on their showroom floor.  This is true because the economics of selling clocks of all kinds, whether floor clocks or mantel clocks or wall clocks or cuckoo clocks, have changed dramatically over the last decades.

Whether you are looking for a Howard Miller Grandfather Clock, a Kieninger Floor Clock, one of the Ridgeway Grandfather Clocks or a Hermle Grandfather Clock, a sophisticated shopper is likely to run into the same grandfather clock shopping questions and issues regardless of where in the USA, Canada, or other parts of the world the consumer or individual may be located.  It is relatively easy to see many grandfather clocks online, but trying to see the one you are most interested in by a particular maker, whether it be one of the Howard Miller Clocks or Hermle Clocks or Ridgeway or Kieninger Clocks, finding the clock to view in person can be a challenge.

In response to that, clock retailers like 1-800-4CLOCKS, in addition to the obvious toll-free service and advice they provide, have also created resources for shoppers to at least begin to understand the different both between and within grandfather clock brands, as well as the type of movements and musical chimes available, the wood used, which is solid hardwood for most all cases, and what the pros and cons are between different clocks, styles, movements, manufacturers, price points, features and much more.

The Grandfather Clocks Blog was launched, in fact, to be a thorough and highly searchable resource for someone who wants to learn not only about new grandfather clocks, but also antique grandfather clocks and Vintage grandfather clocks.

Here are but a few of the titles of blog posts we have used to be the best single source of information for grandfather clock buyers:

Moving Grandfather Clocks

Antique Grandfather Clock Prices

Howard Miller Grandfather Clocks Setup Video

El Howard Miller Video de Como Construir su Reloj de Caja

Granfather Clocks

Types Grandfather Clocks Tops Swans Neck Bonnet Flat or Round Styles

Clocks Index

Grandfather Clocks Information

Grandfather Clock History Revisited

Discounts Grandfather Clocks

Tick Tock Tick Tock

Grandfather Clock Diagram

Grandfather Clock Buying Guide

Tempus Fugit Grandfather Clocks Means Time Flies

Hermle Grandfather Clocks on sale

Grandfather Clocks Discount

Presidential Grandfather Clocks by Howard Miller

Clock Collecting Across Generations

Black Forest Grandfather Clocks

Grandfather Clock Showroom

Chiming Grandfather Clocks

Discount Grandfather Clocks

Grandfather Clocks Made in America

Grandfather Clocks Running Fast Slow Over Time

Grandfather Clocks Private White House Office

Big Ben Clock Turns 150 Today and is As Good as Old

Grandfather Clocks Running Fast Slow How Fix

Discount Grandfather Clock

Grandfather Clocks Make Beautiful Heirlooms

Grandfather Clocks Tallcase Clock Long Case Clock

Grandfather Clocks Wedding Anniversary Presents

Grandfather Clocks eBay

Unusual Grandfather Clocks

Grandfather Clocks Antique or Not

Grandfather Clocks for Sale-Discounts

Grandfather Clocks Howard Miller vs Ridgeway

We also hope you will out 1-800-4CLOCKS.com website, as well as ClocksBlog.com to see even many more resources to help make your clock shopping experience most valuable.  And remember, we at 1-800-4CLOCKS never use a call center and always have knowledgeable grandfather clock people who will be available to answer any questions you may have.

Grandfather Clock Complete Resource Guide

Grandfather Clock Complete Resource Guide

Samsung Galaxy Gear watch – A Watch That Sinks Under Its Features

10.03.13

Samsung’s Galaxy Gear watch is ambitious and even amazing. But it has too many components for one gadget.

Grandfather Clock Repair in California

07.09.13

At 1-800-4CLOCKS, we get requests not only from all over the USA, but also from around the world, regarding where individuals and organizations should go to get their timepiece repaired.  Grandfather Clocks are the most frequently requested category, whether a Howard Miller Grandfather Clock that is no longer under warranty, or a 120 year old antique grandfather clock.  In fact, we get requests for all kinds of mechanical clocks and pocket watches too, including wall clocks, mantel clocks, cuckoo clocks, novelty clocks and grandmother clocks.  This is true for antique wall clocks and antique mantel clocks, including Kieninger Clocks and Hermle Clocks and Ridgeway Clocks.

We no longer encourage people to mail in their timepieces to us for repair.  We used to do that, and found it is much more efficient from everyone’s perspective to get their new or antique clock fixed reasonably locally to them.  To aid in that goal, we are sharing clock shops that do repairs, some with a particular specialty, in various geographical areas.  While we cannot recommend specific shops or warrant any work they might do, we do try here to give you a least of clock repair shops in California that may well be either able to help you themselves, or if not to point you in the right or a good direction.

We hope this list of clock repair shops in California helps.  We will be sharing other clock resources which may be of assistance on a continuing basis.

B & B Antique Clock Repair,  Arroyo Grande, CA 93420, tel. (805) 489-0415

Clock Master, 2734 E. Chapman Ave., Orange, CA 92869, tel. (714) 997-4029

Clocks Americana, 860 North Main, Orange, CA 92868, tel. (714) 997-0923

Clocks Etc., 971 Moraga Road, Lafayette, CA 94549, tel. (925) 284-4720

Davidson Clock Company, 10900 Los Alamitos Blvd, Suite 210, Los Alamitos, CA 90720, tel. (888) 419-6522

HRS Clocks, 490 1st St, Ste C, Solvang, CA 93463, tel. (805) 688-8555

Mike’s Clock Clinic, 17000 Western Avenue # 7, Gardena, CA 90247, tel. (877) 286-6762

Read-Co, 35791 Royal Sage Ct, Palm Desert, CA 92211, tel. (760) 565-1910

Redwood City Clock & Watch, 2738 Broadway, Redwood City, CA, 94062, tel. (650) 556-1197

Slaters Antiques & Collectibles, 609 N. 10th Street, Sacramento, CA 95811, tel. (916) 442-6183

The Clock Man Online, 205 W Commonwealth Ave, Fullerton, CA, 92832, tel. (714) 578-0089

The Tic Toc Shop, 9534 Reseda Blvd (this is the local Post Office address), Northridge, CA 91325, tel. (818) 718-8300

Tom’s Clock Service, 3909 Pacheco Blvd, Martinez, CA 94553, tel. (510) 228-8436

 

 

 

Clock Collecting Across Generations

06.10.13

I’m also pleasantly surprised that my daughter and son have shown some interest in clocks as well.  Initially they had not shown much interest in the grandfather clock idea, but I’m hoping that all these new clocks will help spark an interest, or at least all the exposure to my interest in clocks over the years will make them both a little sentimental about clocks as well.  Almost everyone who comes to my house comments on the fact that there is a clock anywhere you look, although now I’m trying to replace quantity with quality.

I have an old regulator wall clock with the original glass panel advertising Calumet baking powder that used to hang in a store that my grandparents owned.  This was one of two matching clocks, and I found this one in their barn with the wall clock movement missing.  I refinished the case and fit a key-wound pendulum movement from Klockit in it.  I guess that’s the only one that has some meaning or history to it.  I’ve had it hanging in my bedroom for the past 15 years which is nice except when I sleep somewhere else — on vacation, for example — and then it’s too quiet without the tick-tock sound I’m used to hearing.

I’ve also just discovered the novelty clock section of your website and the interesting Rhythm Clocks, so I’ll be looking at those much more closely.  Originally I was single-mindedly focused on grandfather clocks, and then wall clocks, that I haven’t even looked at everything else you offer.

You already definitely have me as a loyal customer.  I can’t promise I’m going to buy a grandfather clock every year, but I did a fair amount of research before I first contacted you, and was already impressed with your selection and prices; now you can add customer service to that as well.  And that’s pretty much the holy triumvirate of the retail business.

My parents own a hardware store, and my grandparents owned a dry goods store and a department store simultaneously, so I appreciate what it takes to deliver good customer service, and I prefer to give my business to a family-owned business that is well run.

Special thanks to a great grandfather clock and wall clock customer who actually wrote the above in an email to us.  The inter-generational aspect of the story, among others, made us believe this would be of interest to some of of grandfather clocks blog readers.

Regulator Wall Clock Calumet for Calumet Baking Powder

Clocks Index

06.04.13

Consumers of all industrial and personal use items have heard of and to some degree follow the Consumer Confidence Index.  People on Wall Street and Economists all look at the Index of Leading Economic Indicators.  Manufacturers and economists alike look at the Consumer Price Index, or CPI, as among other things as a  bellwether for signs of potential inflation on the horizon.  Well here and now we would like to introduce the Clock Index.

Clocks by their nature are organizational creatures, whether they are the heartbeat of the home as a grandfather clock that all can hear and tell the time of day.  Wall clocks throughout the nation, and the World, tell people in homes what time of the day it is, and in offices can be even more integral to the workings of an organization with everything from the start of day, to meetings, to lunchtime, to coffee breaks, to quitting time can all be measured and watched by looking at a wall clock near you.  We have had many customers purchase atomic wall clocks for precisely the reason that they do not want employees discussing or arguing about whether it really is 5 o’clock or whatever the quitting time is, or not.  They see atomic clocks as productivity enhancers.

So should our Clock Index be more than the types of clocks we offer, such as grandfather clocks, mantle clocks, wall clocks, atomic clocks and much more, and should they are highlight the makers, such as Howard Miller Grandfather Clocks, Hermle Floor Clocks, the Ridgeway Grandfather Clock Collection, Kieninger Wall Clocks, Hermle Grandfather and Mantel Clocks, Americana Grandfather Clocks, or should the Clock Index take a completely different wither micro or macro view of the work of clocks.  Should it perhaps include the history if clocks, including the history of grandfather clocks, grandmother clocks, wall clocks and more, or should it highlight the current clock makers like Howard Miller Clocks, Kieninger Clocks, Hermle Clocks, Ridgeway Clocks and more, or should it include some well-known but no longer extant manufacturers of clocks such as Sligh Grandfather Clocks, Bulova Grandfather Clocks, Seth Thomas Clocks including the famous Seth Thomas Grandfather Clocks, Seth Thomas Wall Clocks and Seth Thomas Mantel and Nautical Clocks, among many others.

If one goes father back in clock history, simply 25 years and earlier, there an be thousand of clock makers and tens of thousand of clock and watchmakers around the globe going all the way back to the late 1600s to the present.  The horological history is rich and well documented in many places, and the Clock Index could be the focal point for bringing much of it together.

There are also membership associations such as the National Association of Watch and Clock Collectors (NAWCC) and the American Watch and Clock Institute (AWCI) which are by themselves repositories of vast amounts not only of timepiece expertise and teaching, but also of clock and watch history from the golden days to the present.

Any thoughts individuals may have about the clock history, the current clock and timepiece market more broadly, and how a clock index might fit into all of that and be of most use to grandfather clock, wall clock and mantle clock shoppers, as well as to those studying clock history, would be most welcome to give us their time and thoughtful input.

Grandfather Clock Index

 

Page 1 of 712345...Last »